Pox Cast "water clear"
Two-component clear, colorless epoxy system
-Excellent UV resistance
-Super transparent constituents
-Polishable, hard surface
-Excellent impact strength
-Completely tack free curing even in thin coats
-Ideal for transparent coatings
-Also suitable as a laminating resin system with a very long pot life
The system's reactivity was raised for smaller initial and casting quantities. An initial 500 g can be cast per mould without the surface collapsing. Coats up to 50 mm are possible with larger initial quantities.
Like all reactive resin systems the casting quantity is limited by the generated reaction heat (exothermal reaction): often a lower curing temperature (e.g. at an ambient night temperature lower than 20 °C) can counteract too great an exothermal reaction.
Resin and hardener are homogenized for about two minutes at room temperature (20—25 °C). Afterwards the mixture is left to rest for approx. 20 minutes.
Leave the ready mixture on a flat surface for 48 hours. Please do not mix or otherwise move the product.
Pox Cast resin "water clear"
Modified, low-viscous epoxy resin
-Epoxy casting resin for hardener "water clear"
A universal reactively diluted epoxy resin, which can universally be used for various applications of cold curing epoxy binders
Epoxy casting resin "water clear" Unit Value
Delivered state -
Colour index Gardener < 2
Density at 23 °C
g/cm3 1,14 ± 0,01
Viscosity at 23 °C
mPa*s 950 ± 100
eq / kg 5.13
Storage (original packed)
months min. 12
Pox Cast Hardener "water clear"
-Hardener for epoxy casting resin "water clear"
-Mixing ratio: 100 : 30 parts by weight resin : hardener
-Processing time approx. 5 hours
-Curing time approx. 24-48 hours